Replace Lock in UPVC Door
If you have a upvc door lock that isn't working properly, you must call a professional locksmith. They are quick, efficient and will finish the job to a high standard.
It's not difficult to change the bar lock made of upvc. You only need to know what is involved and follow the steps below.
Eliminating the Barrel Lock
Upvc windows and doors are extremely common in a wide range of properties. They are great for allowing natural light into the home and are simple to open using the right key. It takes just five minutes to replace the barrel on a lock made of uPVC uPVC. If you've lost your keys, a tenant left and hasn't returned them or the barrel of your lock is damaged, this is a quick solution.
You'll need to remove the handle screws first. This will allow you to move the handles removed from the way so that you can access the lock barrel screw. Be careful not to loosen the screws too much as this could cause damage to the handles or cause them to fall off while you are working.
After the screws are removed, locate the screw that holds the lock in place on the inside of your door. This screw is distinct in color to the other screws on your door and stands out. Remove the screw with a Phillips screwdriver. Next, take the present key used to lock the lock and place it in the barrel. Turn it to the right as far as you can. This should let the barrel loose and make it easier to pull out of the door.
After loosening the screw, you will be able to break the pins that hold the Euro Cylinder in place. You'll need pliers with strength or mole grips to do this. Take the protruding end of the euro cylindrical cylinder and bend it upwards and down and from side to side. This will cause the support pins to break, thereby holding it in place.
Installing the new cylinder can be done after the old one has been removed. The first step is to determine the size of the lock cylinder in order to ensure that you have ordered the right replacement. This can be done by measuring the distance between the center of circular keyhole and the center of square spindle. The measurement should be taken at the upper spindle.
Changing the Cylinder
The euro cylinder is the main locking mechanism of doors made of upvc. It is easy to replace and doesn't require a locksmith or handyman. If your lock isn't protected by this protection, you should replace it with one that has. They are very affordable and can save you money and inconvenience when your locks are compromised by these security threats.
Open the door and then stand in the front of it. This will allow you to reach the screw that holds the handle by hand or using the appropriate tool. You can loosen this screw a little maybe a quarter-turn to get started.
After this is completed the cylinder will come out easily as it is no longer fixed by the screw. Next, you will need to determine what size replacement cylinder you require. There are around 25 different sizes to pick from. click to investigate is a good idea to bring the old cylinder along when you buy a new one so that you can be sure it will fit.
If you're unsure of the dimensions, measure from the screw hole center to the cylinder's end. This is the only way to be sure you are getting the right size cylinder for your Upvc doors.
Once you have the replacement cylinder in place, you can insert it into your door in reverse order to the way you took out the old one. It might be tricky to align the lock cam but it is usually an issue with alignment, and will be fixed eventually.
You will now need to screw the long securing screw back into place. Once this is done you can test the new cylinder and ensure that it is secure inside the door. If you are happy that it is, reconnect the handle and close the door to check again. If everything is working as it should the cylinder lock on your upvc doors has been replaced and you've added a layer of security to your home.
Change the Handle
There are many reasons why the handle of a door or door knob can become loose. It could be due to the wear and tear of the handle or the square spindle within the handle. In this scenario, the door handle needs to be replaced.
It is crucial that the door be opened so that it will not close between removing the handle and replacing it. Then remove the screws from the inner surface of the plate with a screwdriver. This will free the handle from the plate. Do not lose these screws, as you may need to tighten them again later.
You can now remove the handles to get access to the cylinder lock within the door. The lock will be a circular or bulb-shaped cylinder. It is only found in multi-point locks on upvc doors, as well as some doors made of aluminium. The process of changing the cylinder is the same as changing the handle. The only difference is that you'll need to take the old cylinder out of the door and replace it with a brand new one.
It is important to consider the size of the handle replacement when choosing one. Make sure the handle you choose is of a similar size to the original because it will have to be able to be able to fit over the screws that secure the handle. The best place to begin is by referring to the size matrix that will list the common sizes of replacement handles as well as their keyhole center to handle plate distance.
Consider upgrading your upvc door handles to a higher security standard like a Sold Secure SS301 set or 2* Kitemark security handles. This will increase the security of your house and make it easier to operate your door. These sets are a bit more expensive, but the added security and peace of mind is worth the cost. You don't want to repeatedly push the door handle upwards and downwards to open or close it.
Modifying the Lock
The lock on your uPVC can be a vulnerable point for thieves. You may want to upgrade your uPVC door to a multipoint lock in order to make it more secure. This would include a deadbolt along with an open hook to block the intruders. A professional locksmith can help you with this, however it is also possible to do the job yourself. You'll need several tools, but the process is easy and quick.
The first step is to loosen the screws that hold the handle in place. You can remove the screws using a screwdriver and store them in a safe place. You can then lift the handle and reveal the screw that holds the cylinder. It is possible to remove the screw and replace it with a a new one. You should make sure that the screw is exactly the same size as the original. It will need to be aligned correctly with the lock barrel.
Changing the lock of your uPVC can be intimidating. You depend on it to secure your home, and a mistake could leave you without a way to open the door. However, if you know how to do it, the process is fairly simple and will cost you less than hiring a locksmith.
To change the lock on your uPVC door, you will have to open the inner faceplate of the lock. You'll need to locate the screw inside the door and the bolt that holds it outside the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
There are several reasons why you might need to change the lock on your uPVC doors. You might need to alter the lock on your uPVC door due to many reasons.
The process of changing a uPVC lock could be done by anyone with basic DIY skills. You will need to inspect the hinges inside the mechanism, which can be a difficult task when the lock is stuck. If the hinges have been lubricated and are in good condition, it can be a straightforward repair. If you aren't sure that it will be a simple fix, contact an expert.